CB antenna PNI LED 2000, 90 cm, 145mm magnet and PNI SWR-300 reflectometer for SWR measurement, black
PNI-LED20-BM - PNI LED 2000 CB antenna, 90 cm, with 145mm magnetic base, 26-28 MHz, 500 Watt, illuminates during transmission
LED coilPNI LED 2000 brings an innovative element to the field of CB antennas: the coil of the antenna lights up when the station is broadcasting. The higher the emission power, the higher the luminous intensity of the LED. | |
performancesThe performance of the PNI LED 2000 antenna is closely related to the technical characteristics of the antenna in ideal conditions of installation and use: SWR < 1.2:1, maximum applied power 500 W, impedance 52 Ohms, stainless steel, etc. | |
Communication distanceCommunication distance is another decisive factor when it comes to choosing a CB antenna. Thus, the maximum communication distance of 10 km is achieved in ideal working conditions: calibrated antenna, open field without obstacles, the station with the legally permitted maximum power of 4W and with a standard reception. Any obstacle such as hills, mountains, buildings can reduce this distance. | |
LengthThe length of the antenna is another important factor that can influence the communication distance. Thus, the longer the antenna, the greater the range of action. PNI LED 2000 has a length of 90 cm (coil+spike). | |
Accessories includedThe package includes the 145 mm magnetic base that allows the antenna to be fixed on the car dome and connected to the radio station via the PL259 cable and plug. |
PNI-LED20-BM - PNI LED 2000 CB antenna, 90 cm, with 145mm magnetic base, 26-28 MHz, 500 Watt, illuminates during transmission | |
---|---|
Product identification | |
Product code | PNI-LED20-BM |
Work tape | ? B |
Product color (spike) | Silver |
Coil color | Black |
General characteristics | |
Working frequency | 26 - 28 Mhz |
Maximum power applied | 500W |
Minimum SWR in the center of the band | less than 1.2:1 |
Length | Spike length: 750 mm Antenna length: 900 mm |
Impedance | 50 Ohms |
Material | Stainless steel |
Connector type | PL |
Cable length | 4 m |
Weight | 1201 g |
size | Antenna: 44 x 44 x 900 mm Magnetic base: 145 x 145 x 60 mm |
Working distance | 10 km |
Magnetic base | Yes, 145mm |
Operating temperature | -26°C ~ +80°C |
The package contains | |
Radio station antenna | Yes |
RG58 cable | Yes, 4 m |
Plug PL259 | Yes |
Magnetic base | 145 mm |
PNI-SWR300 - Reflectometer PNI SWR-300 PWR-SWR Meter, for measuring the SWR of radio antennas in the 26-30Mhz frequency and CB radio station power | |
---|---|
Product identification | |
Product code | PNI-SWR300 |
General characteristics | |
SWR measurement | Yes |
Power measurement | 0.5-10 W / 10-100 W |
Accuracy | SWR ± 5% / POWER ± 10% |
Frequency | 1.5-150MHz |
size | 85 X 76 X 58 mm |
Impedance | 50 Ohms |
Connector | SO 239 |
The package contains | |
Reflectometer | Yes |
User manual | Yes |