PNI ML75 CB antenna and PNI T601 mounting cable

PNI ML75 CB antenna package and PNI T601 mounting cable, length 75cm, 26-28MHz, 300W, foldable,

CB antenna PNI ML40, length 57 cm

CB antenna PNI ML40, length 57 cm, with M6 to M5 threaded male-male adapter included

CB antenna PNI LED 850, 85 cm, 300 Watt, foldable, illuminates during transmission and PNI T601 mounting cable

CB antenna PNI LED 850, 85 cm, 300 Watt, foldable, illuminates during transmission and PNI T601 mounting cable
£25.28
Availability: Out of stock
SKU
PNI-LED850-T601

PNI-LED850FC - Foldable PNI LED 850 CB antenna, 85 cm, 26-28 MHz, 300 Watt, illuminates during transmission, PL thread type, without accessories



Foldable CB PNI LED 1000 antenna

LED coil - illuminates during emission

The folding CB antenna PNI LED 850 is the continuation of a new line of CB antennas, designed to make the use of the CB band unique.

The antenna guarantees superior communication performance and improves visibility to the maximum.

The antenna coil is equipped with diodes that emit light when passed through by radio frequency. The coil lights up automatically when the radio is transmitting, thus indicating the correct operation of the equipment.

Antenna length 85 cm

The CB antenna PNI LED 850 with a length of 85 centimeters helps the transmission and reception in the CB band at a distance of up to 10 km (under ideal conditions, without obstacles).

Factors influencing communication distance:
» Antenna length: Longer antennas will have a greater transmit and receive range.
» Mounting location: the higher the antenna is mounted, the better the range.
» Installation quality : Installation mistakes will result in high SWR and limited range.
» Surrounding Terrain: The surrounding terrain plays a huge role in determining range. Obstacles such as buildings or mountainous areas will limit the range.

Foldable CB PNI LED 1000 antenna

Foldable CB PNI LED 1000 antenna

Possibilities of use

The antenna has the possibility to be mounted either on a PL magnetic base or on a separately purchased fixed support (for example: PNI SPA100 , PNI SPA125 , PNI L21 ).

Test the SWR in an open area using a reflectometer. In some cases it may be necessary to raise or shorten the wire to obtain an optimal SWR value.

For optimal results, we recommend that this procedure, called calibration , be performed by specialized personnel.

Note: PNI antennas are factory calibrated on the 27.225Mhz frequency (channel 22) .

PNI-T601 - Connecting cable PNI T601 for threaded antennas includes plug PL259



compatibility

Compatibility

The PNI T601 cable can be used to mount a PL type antenna.

Length

The length of the cable is 4m, thus allowing you to mount the antenna wherever it is convenient for you on the vehicle and still be able to make the connection with the CB radio station.

length

Connecting cable PNI T601

RG58 cable

The cable used is of very good quality RG58 coaxial type with maximum performance in terms of emission and reception.

Video presentation

Folding CB PNI LED 850 antenna, 85 cm, 26 28 MHz ENG

Write Your Own Review
You're reviewing:CB antenna PNI LED 850, 85 cm, 300 Watt, foldable, illuminates during transmission and PNI T601 mounting cable
Your Rating

PNI-LED850FC - Foldable PNI LED 850 CB antenna, 85 cm, 26-28 MHz, 300 Watt, illuminates during transmission, PL thread type, without accessories

Product identification
Product code PNI-LED850FC
Work tape ? B
Product color (spike) Silver
Coil color Black
General characteristics
Working frequency 26 - 28 Mhz
Number of channels 80
Maximum power applied 40 W continuous / 300 W for a short time
Minimum SWR in the center of the band less than 1.2:1
Length 850 mm
Impedance 50 Ohms
Material Stainless steel
Connector type PL
Hole diameter 16 mm
size 40 x 40 x 850 mm
Polarization vertically
Working distance 10 km
Magnetic base It is not included
Operating temperature -26 ~ +55°C
tiltable Yes, up to 90 degrees
The package contains
Radio station antenna Yes


PNI-T601 - Connecting cable PNI T601 for threaded antennas includes plug PL259 length 4m

Product identification
Product code PNI-T601
General characteristics
Length 4 m
jack PL 259
Cable type Coaxial RG58
Compatible with Threaded antennas



PNI-LED850FC
Lang Type Name Link
EU10 Declaration of Conformity Declaration of conformity Link

PNI-T601
Lang Type Name Link
EU10 User manual Datasheet EU9 Link