CB antenna PNI ML90 26-30MHz, 75cm, 150W, with magnetic base 145cm included
PNI-145-PL - Magnetic base PNI 145/PL 145mm contains 4m cable and plug PL259
Magnetic baseThe magnetic base PNI 145/PL has a diameter of 145 mm, a size that gives the antenna stability even at high speeds, having a pleasant design. |
|
| Threaded fasteningThe PNI145/PL base is compatible with antennas that have an internal thread fastening system. |
Cable lengthThe length of the cable is an important factor in choosing a magnetic base. The base from PNI 145/PL has a quality cable with a length of 4 m, which allows placing the antenna on the dome of the car without any problem, and placing the cable so as not to disturb the passengers. |
|
| Strong magnetThe PNI145/PL base has a strong magnet for its size, which gives it a very good grip on the car dome, and resistance and stability even at high speeds. |
Plug PL259The PNI 145/PL magnetic base is equipped with RG58 coaxial cable and PL259 plug for direct connection to the station. |
|
| Rubber support includedIn order to protect the car dome from possible scratches, but without affecting the operation of the antenna in optimal parameters, the magnetic base 145/PL is provided with a thin and resistant rubber support, which also protects the connections and solders inside it from water. |
PNI-ML90FC - CB antenna PNI ML90 26-30MHz, 71 cm, 150W, without cable, compatible with any PL259 connection
| Resistant and efficientThe PNI ML90 CB antenna has a length of 71 cm and a communication distance of 8 - 10 km (under ideal conditions of use). It is perfect for drivers of TIRs, trucks or cars who want a product that ensures good communication in traffic. The SWR of less than 1.2:1 and the maximum supported power of 150W are essential specifications that recommend this product to the most demanding users. |
Choose correctlyWhen choosing a CB antenna, the following aspects must be taken into account:
The CB antenna is very important in the station-antenna assembly because the quality of the emitted and received signal depends on it. The quality of CB PNI antennas is already known by the very low values of the SWR. |
|
| Compatible PNI accessoriesThe PNI ML90 CB antenna with ø16 mm thread is compatible with all PL type magnetic bases ( for example: PNI 145/PL ). PNI also offers a wide range of accessories recommended for threaded antennas:
|
PNI-145-PL - Magnetic base PNI 145/PL 145mm contains 4m cable and plug PL259 | |
|---|---|
| Product identification | |
| Product code | PNI-145-PL |
| General characteristics | |
| Sole diameter | 145 mm |
| Maximum speed | 200 km/h |
| Weight | 730 g |
| Cable length | 4 m |
| Compatible antenna type | With internal thread |
| size | 15x15x6 cm |
| The package contains: | |
| Magnetic base | Yes |
| Cable | Yes, 4m |
| jack | Yes, PL259 |
PNI-ML90FC - CB antenna PNI ML90 26-30MHz, 71 cm, 150W, without cable, compatible with any PL259 connection | |
|---|---|
| Product identification | |
| Product code | PNI-ML90FC |
| Work tape | ? B |
| Product color (spike) | Black |
| General characteristics | |
| Working frequency | 26 - 30 MHz |
| Maximum power applied | 150W |
| Minimum SWR in the center of the band | less than 1.2 |
| Length | 71 cm |
| Impedance | 50 Ohms |
| Material | Fiber glass |
| Connector type | PL |
| Hole diameter | 16 mm |
| Weight | 280 gr |
| size | 715 x 21 x 21 mm |
| Polarization | vertically |
| Working distance | 10 km |
| Magnetic base | It doesn't have |
| Operating temperature | -26°C ~ +80°C |
| The package contains | |
| Radio station antenna | Yes |
FAST SHIPPING
You'll have your ordered products in just a few days.
MONEY BACK GUARANTEE
If you decide to return your products, you will get all your money back.
ONLINE SUPPORT 24/7
Contact us and we will answer to all your questions about orders, returns or warranty.
