CB PNI ML200 antenna, length 200cm, 26-28MHz, 1000W with RG58 cable 4 meters included

The ideal choice of a CB antenna

For the right choice of a CB antenna, the following aspects must be taken into account: the method of attachment, the length of the antenna depending on the desired communication distance and the positioning of the antenna on your car or truck. The CB antenna is very important in the station-antenna assembly because it reproduces the quality of the emitted and received signal. The quality of CB PNI antennas is already known by the very low values of the SWR.

PERFORMANCE: Maximum applied power 1000 W

The PNI ML200 CB antenna is known for its performance and technical characteristics, being able to be calibrated to an SWR lower than 1.2:1. The length of the antenna of 200 cm, the vertical polarization and 50 Ohm impedance provide a pleasant experience for any CB radio station user.

It can be used on a frequency range between 26 - 28 MHz, in extreme weather conditions, resisting temperatures between -26° and +60°, this is due to the high quality materials used for its manufacture. The PNI ML200 CB antenna is built with great flexibility   due to the spring at the base of the wire, but also the material: stainless steel.

The communication distance is another decisive factor in the purchase and use of a CB antenna. PNI ML200 offers the possibility of a communication of up to 20 km in ideal working conditions: calibrated antenna, open field without obstacles, the station with the maximum power allowed by law and with a standard reception. Any obstacle such as: hills, mountains, buildings, walls can reduce this distance.

ONE CB ANTENNA: Multiple possibilities of use

The PNI ML200 CB antenna can be used both on a magnetic base (we recommend a minimum of 145 mm, PNI 145/PL) or on a fixed support. The CB antenna comes fully equipped for mounting on any type of fixed support (we recommend PNI L1, PNI T941, PNI SPA100, SPA110, SPA120 or SPA130) on a car or truck.

The package contains: RG58 cable with a length of 4 meters, PL259 plug for connection to the station, SO239 PL 16mm connector and rubber seal.