CB PNI ML50 antenna, length 48cm, 26-28MHz, 600W with RG58 connection cable 3.5 meters, without PL259 plug

The ideal choice of a CB antenna

To choose the right CB antenna, the following aspects must be taken into account: the mounting method, the length of the antenna depending on the desired communication distance and the positioning of the antenna on your car or truck. The CB antenna is very important in the station - antenna assembly because it provides the quality of the transmitted and received signal. The quality of PNI CB antennas is already known by the very low SWR values.

PERFORMANCE: Maximum applied power 600 W

The PNI ML50 CB antenna is known for its performance and technical characteristics, being able to be calibrated to an SWR of less than 1.2:1. The antenna length of only 48 cm, vertical polarization and 50 Ohm impedance offer a pleasant experience for any CB radio station user.

It can be used on a frequency range between 26 - 28 MHz, in extreme weather conditions, resisting temperatures between -26° and +60°, this is due to the high quality materials used for its manufacture.

Communication distance is another decisive factor in the purchase and use of a CB antenna. The PNI ML50 offers the possibility of communication up to 10 km in ideal working conditions: calibrated antenna, open field without obstacles, the station with the maximum power allowed by law and with standard reception. Any obstacle such as: hills, mountains, buildings, walls can lead to a reduction in this distance.

ONE CB ANTENNA: Multiple usage possibilities

The PNI ML50 CB antenna can be used both on a magnetic base (we recommend PNI 145/PL) or on a fixed support. The CB antenna comes fully equipped for mounting on any type of fixed support (we recommend PNI L1, PNI T941, PNI SPA100, SPA110, SPA120 or SPA130) on a car or truck.

The package contains: RG58 cable with a length of 3.5 meters, SO239 PL 16mm connector and rubber gasket.

Attention, it does not contain the PL259 connection plug in the station.