CB radio station kit PNI Escort HP 2020 single channel 22 with CB antenna PNI ML100 with magnet

One channel, one frequency

The PNI Escort HP 2020 CB station is the latest innovation of the PNI brand. The station comes preset from the factory on a single frequency, 27.225 MHz, a single modulation (FM) and a single channel, the channel. No. 22.

The CB PNI Escort HP 2020 station is dedicated to use exclusively in Romania.

Basic functions

Equipped with the basic functions, automatic and manual Squelch control, the PNI Escort HP 2020 station becomes extremely easy to use. All you have to do is power it (12V) and connect it to a calibrated external antenna. Press the PTT button and immediately start broadcasting. Forget about the problem of setting up the various functions that CB stations are usually equipped with. Enable squelch manually or automatically only if needed, depending on the background noise on the tape.

In a nutshell

PNI Escort HP 2020 is a simple station, reduced to basic functions. With LED indicators for the operating status (on/off) and for the transmitting/receiving status, the HP PNI 2020 really becomes an indispensable device for drivers, without additional settings, without norm and channel setting, without activating/deactivating functions. You install it, power it and fully enjoy all the advantages of CB communication.

Performance of the PNI ML100 CB antenna

The performance of the product is closely related to the technical characteristics that the antenna has in ideal conditions of assembly and use: SWR <= 1.1, maximum applied power 250 W continuously, impedance 50 Ohms, stainless steel, etc.

Communication distance

The communication distance is another decisive factor in the acquisition and use of a CB antenna. Thus, the communication distance of maximum 12 km is achieved in ideal working conditions: calibrated antenna, open field without obstacles, the station with a maximum legally allowed power of 4W and with a standard reception. Any obstacle such as: hills, mountains, buildings, walls can lead to a decrease in this distance.

Antenna length

The length of the antenna is a very important factor that can influence the communication distance. Thus, the longer the antenna, the greater the range. The PNI ML100 antenna has a length of 110 cm (magnetic base included).

Magnetic base

The 120/PL magnetic base in the package is provided with a 4 m cable, enough to place the antenna on the dome, has a diameter of 125 mm and a strong magnet that gives the antenna stability even at high speeds.

Complete package

This kit is ready for assembly having: antenna, magnetic base with cable and PL259 plug, imbus for calibration. All you have to do is mount the antenna on a magnetic base, connect it to a CB radio station and calibrate it to use it at maximum performance.