Charger and rectifier PNI C130 for car batteries, input 230V, output 6V/12V 2A 4A 8A 12A, output 24V 1A 2A 4A 6A, 2 USB ports

Fast and efficient charging

The PNI C130 charger and rectifier, with 7 charging stages, ensures the charging and maintenance of lead acid, gel, calcium or AGM batteries.

The PNI C130 has multiple charging modes depending on the environmental conditions or charging purpose:

• charging and maintenance mode (recommended mode for standard batteries and for charging in temperature conditions above 5°C),
• trickle charge mode (ideal for a long battery connection),
• winter charging mode ,
• reconditioning mode (applies an increased charging voltage in a controlled manner to allow recovery of highly discharged batteries) or
• automatic charging mode which will automatically select the fastest and safest charging mode for the battery.

Battery analyzer

The PNI C130 charger and rectifier performs a battery analysis: battery voltage analysis, engine starting power analysis, battery capacity analysis and alternator output analysis.

The PNI C130 provides you with all the necessary tools for the longest and safest use of your vehicle's battery.

The display shows information about usage, charging and testing modes, as well as various error codes for quick identification of problems.

Memory function

The memory function allows the vehicle's audio and electrical settings to be saved when the battery is disconnected.

The PNI C130 is a rectifier that is easy to install and use.

With integrated functions, modes and protections and its ability to adapt to different situations, the PNI C130 car charger and rectifier becomes an indispensable tool for any driver.

7 charging stages

PNI C130 through its 7 charging stages can repair extremely discharged or sulfated batteries.

The PNI C130 charger and rectifier has the ability to analyze, test, recondition and charge batteries in a safe and intelligent way.

The charging process is optimized extending the life of the battery.

How to connect the PNI C130 rectifier to the battery

ATTENTION: Connecting the PNI C130 charger-rectifier to the battery is done differently if the battery is mounted on the car or not .

1. Make sure the AC adapter is not connected to an AC power source.

2. a. For batteries located in the vehicle:
• Connect the red (+) clamp of the rectifier to the red (+) terminal of the battery.
• Connect the black (-) clamp of the rectifier to a bolt on the engine block away from the battery and fuel lines.

2. b. For batteries located outside the vehicle
• Connect the red (+) clamp of the rectifier to the red (+) terminal of the battery.
• Connect the black (-) clamp of the rectifier to the black (-) terminal of the battery.

Note: If you have reversed the polarity, the LED on the rectifier will light up.

3. Connect the AC adapter to an AC power source and turn on the rectifier.

4. After charging the battery, disconnect the rectifier from the power source. Next, disconnect the rectifier from the engine block and then from the battery.