Kit Radio CB President Harry 3 ASC + CB Antenna PNI ML70, length 70cm, 26-30MHz, 200W

Easy to use, maximum performance

With this station, President tried to make the transition between the entry-level range, with a small LCD display and premium range functions.

Thus, the Harry 3 model is delivered with a wide range of options among which we can mention: VOX, ANL, NB, Hi-Cut or RF Gain.

Types of modulation

The President Harry 3 CB radio station with the possibility of 12-24V power supply corresponds to the latest European CB standards.

As a unique option, the station has a switch for changing the type of modulation which will allow the selection of the mode of operation.

Station functions

The CB President Harry III radio station has a multitude of functions, among which we list the most important ones:

- ASC, ANL, NB, Hi-Cut, RF Gain to reduce background noise

- VOX (Voice operated exchange), Scan channels, Roger Beep, lock keys, save channels.

CB antenna performance PNI ML70

The performance of the product is closely related to the technical characteristics of the antenna in ideal conditions of installation and use: SWR <= 1.2, maximum applied power 200 W, impedance 50 Ohms, stainless steel, etc.

Communication distance

The communication distance is another decisive factor in the purchase and use of a CB antenna. Thus, the maximum communication distance of 9 km is achieved in ideal working conditions: calibrated antenna, open field without obstacles, the station with the legally permitted maximum power of 4W and with a standard reception. Any obstacle such as: hills, mountains, buildings, walls can reduce this distance.

Antenna length

The length of the antenna is a very important factor that can influence the communication distance. Thus, the longer the antenna, the greater the range of action. The PNI ML70 antenna is 70 cm long (magnetic base included).

Magnetic base

The magnetic base PNI 145/PL in the package is provided with a 4 m cable, enough for placing the antenna on the dome, it has a diameter of 145 mm and a strong magnet that gives the antenna stability even at high speeds.

Full package

This kit is ready for assembly with: antenna, magnetic base with cable and plug PL259, Allen key for calibration. All you have to do is mount the antenna on the magnetic base, connect it to a CB radio station and calibrate it to use it at maximum performance.