Kit Radio CB President WALKER II ASC + CB Antenna PNI ML70, length 70cm, 26-30MHz, 200W
PNI-WALK2 - President WALKER II ASC CB radio station with automatic squelch
| The most widespread CB model President Walker II is the new version of the most widespread CB radio President model among the truck driver community. In addition to the design that preserves the classic lines and robust buttons resistant to long-term use, Walker II has a digital display for a better visualization of the channels, frequency and active functions, but also an analog S-Meter, specific to the models in the upper range intended for drivers with experience in CB. |
POWER The radio station President Walker II / 12 V ASC complies with the legislation in force in Romania harmonized with European norms, having the maximum legal power allowed of 4 W. As a whole, Walker II is prepared to face intense use while ensuring the quality of transmission and reception, specific to President. |
|
| 40 CHANNELS The President Walker II ASC CB radio station complies with the latest European CB standards. As a unique option, the station has a switch for changing the modulation type, which will allow you to select the operating mode. Of course, the functions already present in the WALKER I model, such as ROGER BEEP, PUBLIC ADDRESS, RF GAIN and RF POWER, were not forgotten. A pleasant surprise is the inclusion of the TONE function that allows improving the reception audio level and the SWR measurement function both through the display and through audio tones. |
AUTOMATIC SQUELCH CONTROL The station is equipped with many functions and of course the ASC is adjusted to work much better than the previous version. It is interesting the presence in the station menu of some functions available until now only on models with digital display, such as VOX with all the specific settings, SCAN and TALKBACK. |
|
PNI-ML70 - PNI ML70 CB antenna, length 70cm, 26-30MHz, 200W, magnet 145 mm included
| CB antenna performance PNI ML70The performance of the product is closely related to the technical characteristics of the antenna in ideal conditions of installation and use: SWR <= 1.2, maximum applied power 200 W, impedance 50 Ohms, stainless steel, etc. |
Communication distanceThe communication distance is another decisive factor in the purchase and use of a CB antenna. Thus, the maximum communication distance of 9 km is achieved in ideal working conditions: calibrated antenna, open field without obstacles, the station with the legally permitted maximum power of 4W and with a standard reception. Any obstacle such as: hills, mountains, buildings, walls can reduce this distance. |
|
| Antenna lengthThe length of the antenna is a very important factor that can influence the communication distance. Thus, the longer the antenna, the greater the range of action. The PNI ML70 antenna is 70 cm long (magnetic base included). |
Magnetic baseThe PNI 145/PL magnetic base in the package is provided with a 4 m cable, sufficient for placing the antenna on the dome, it has a diameter of 145 mm and a strong magnet that gives the antenna stability even at high speeds. |
|
| Full packageThis kit is ready for assembly with: antenna, magnetic base with cable and plug PL259, Allen key for calibration. All you have to do is mount the antenna on the magnetic base, connect it to a CB radio station and calibrate it to use it at maximum performance. |
PNI-WALK2 - President WALKER II ASC CB radio station with automatic squelch | |
|---|---|
| Product identification | |
| Producer | President |
| Product code | PNI-WALK2 |
| General characteristics | |
| Model | Portable |
| Emission band type | AM/FM |
| channels | 40 |
| Frequency | 26.965 - 27.405 MHz |
| Microphone type (pins) | 6 pins |
| Speaker audio power | 3 W |
| Sensitivity (20dB SINAD) | 0.5 mV – 113 dBm (AM / FM) |
| Audio signal distortion | less than 3% @ 1KHz |
| Emission power | 4 W |
| Hi/Low power selection | Yes |
| feeding | 13.2 V |
| Absorbed current | 400 mA nominal / 1000 mA max |
| Dimensions (W x H x D / Weight) | 170 X 200 X 54 mm / 1.78 kg |
| 1DIN assembly | Yes |
| Special features | |
| Dual Watch | Yes |
| Channel scan | Yes |
| RF Gain | Yes |
| Small Gain | Yes |
| ASQ | Yes |
| ASQ adjustable | Yes |
| Noise filter | ANL (Automatic Noise Limiter) |
| Multicolor screen | 7 colors |
| Automatic Digital Squelch (ASQ) | Yes |
| Manual squelch | Yes |
| and meter | Yes |
| Operating temperature | -26 ~ +55°C |
| Rear panel connections | |
| Additional speaker connection | Yes |
| Outdoor PA connection | Yes |
| Microphone connection | Yes |
| Microphone connection with VOX function | Yes |
| Front panel connections | |
| USB port | Yes |
| 2 pin jack | Yes |
| The package contains | |
| Radio station | Yes |
| Microphone | Yes |
| Support and screws for holding the radio station | Yes |
| Microphone support and screws | Yes |
| Power cord | Yes |
| User manual | Yes |
PNI-ML70 - PNI ML70 CB antenna, length 70cm, 26-30MHz, 200W, magnet 145 mm included | |
|---|---|
| Product identification | |
| Product code | PNI-ML70 |
| Work tape | ? B |
| Product color (spike) | Black |
| General characteristics | |
| Working frequency | 26 - 28 Mhz |
| Number of channels | |
| Maximum power applied | 200W |
| Minimum SWR in the center of the band | less than 1.2 |
| Length | 70 cm (magnetic base included) |
| Impedance | 50 Ohms |
| Material | Stainless steel |
| Connector type | PL |
| Hole diameter | 16 mm |
| Cable length | 4 m |
| Weight | 800g |
| size | 100 x 18 x 5 cm |
| I earn | 4 dBi |
| Working distance | 8 km |
| Operating temperature | -26°C ~ +80°C |
| The package contains | |
| Radio station antenna | Yes |
| RG58 cable | 4 m |
| Plug PL259 | Yes |
| Magnetic base | 145 mm |
 PNI-WALK2 |
| ||||||||||||||||||||||||||||||||
 PNI-ML70 |
|