PNI ML100 CB antenna, 100 cm, 125mm magnet and PNI SWR-300 reflectometer for SWR measurement, black
PNI-ML100 - PNI ML100 CB antenna, length 100 cm, 26-30MHz, 250W, 125mm magnet included
| CB antenna performance PNI ML100The performance of the product is closely related to the technical characteristics of the antenna in ideal conditions of installation and use: SWR <= 1.1, maximum power applied 250 W continuously, impedance 50 Ohms, stainless steel, etc. |
Communication distanceThe communication distance is another decisive factor in the purchase and use of a CB antenna. Thus, the maximum communication distance of 12 km is achieved under ideal working conditions: calibrated antenna, open field without obstacles, the station with the legally permitted maximum power of 4W and with a standard reception. Any obstacle such as: hills, mountains, buildings, walls can reduce this distance. |
|
| Antenna lengthThe length of the antenna is a very important factor that can influence the communication distance. Thus, the longer the antenna, the greater the range of action. The PNI ML100 antenna is 110 cm long (magnetic base included). |
Magnetic baseThe magnetic base 120/PL in the package is provided with a 4 m cable, enough to place the antenna on the dome, it has a diameter of 125 mm and a strong magnet that gives the antenna stability even at high speeds. |
|
| Complete packageThis kit is ready for assembly with: antenna, magnetic base with cable and plug PL259, Allen key for calibration. All you have to do is mount the antenna on the magnetic base, connect it to a CB radio station and calibrate it to use it at maximum performance. |
PNI-ML100 - PNI ML100 CB antenna, length 100 cm, 26-30MHz, 250W, 125mm magnet included | |
|---|---|
| Product identification | |
| Product code | PNI-ML100 |
| Work tape | ? B |
| Product color (spike) | Silver |
| General characteristics | |
| Working frequency | 26 - 28 Mhz |
| Number of channels | 90 |
| Maximum power applied | 250W |
| Minimum SWR in the center of the band | 1.0 |
| Length | 100 cm (110 cm with base included) |
| Impedance | 50 Ohms |
| Material | Stainless steel |
| Connector type | PL |
| Hole diameter | 16 mm |
| Cable length | 4 m |
| Weight | 1.2 Kg |
| size | 1000 x 150 x 40 mm |
| Gain | 4 dBi |
| Working distance | 12 km |
| Operating temperature | -26°C ~ +80°C |
| The package contains | |
| Radio station antenna | Yes |
| RG58 cable | 4 m |
| Plug PL259 | Yes |
| Magnetic base | 125 mm |
PNI-SWR300 - Reflectometer PNI SWR-300 PWR-SWR Meter, for measuring the SWR of radio antennas in the 26-30Mhz frequency and CB radio station power | |
|---|---|
| Product identification | |
| Product code | PNI-SWR300 |
| General characteristics | |
| SWR measurement | Yes |
| Power measurement | 0.5-10 W / 10-100 W |
| Accuracy | SWR ± 5% / POWER ± 10% |
| Frequency | 1.5-150MHz |
| size | 85 X 76 X 58 mm |
| Impedance | 50 Ohms |
| Connector | SO 239 |
| The package contains | |
| Reflectometer | Yes |
| User manual | Yes |
FAST SHIPPING
You'll have your ordered products in just a few days.
MONEY BACK GUARANTEE
If you decide to return your products, you will get all your money back.
ONLINE SUPPORT 24/7
Contact us and we will answer to all your questions about orders, returns or warranty.
