PNI ML70 CB Antenna Package, length 70cm with magnet included + PNI SWR-300 Reflectometer

PNI ML70 CB Antenna Package, length 70cm with magnet included + PNI SWR-300 Reflectometer

CB antenna PNI S60 and reflectometer for SWR measurement

PNI S60 CB antenna, 59 cm, with butterfly, 4m RG58 cable and PNI SWR-300 reflectometer for SWR measurement, black

PNI ML75 CB antenna, 75 cm, 300W, foldable and PNI SWR-300 reflectometer for SWR measurement, black

PNI ML75 CB antenna, 75 cm, 300W, foldable and PNI SWR-300 reflectometer for SWR measurement, black
£33.18
Availability: Out of stock
SKU
PNI-ML75-R300

PNI-ML75FC - PNI ML75 CB antenna, length 75cm, 26-28MHz, 300W, foldable, without accessories



PNI ML70 CB antenna

CB antenna without cable

The PNI ML75 CB antenna operates in the 26-28 MHz frequency range. It is 75 cm long and can communicate over a distance of up to 8 km (under ideal conditions of use).

The PNI ML75 is perfect for drivers of TIRs, trucks or cars who want a product that ensures good communication in traffic.

The SWR of less than 1.2:1 and the maximum power supported of 300W (for a short time) are essential specifications that recommend this product to the most demanding users.

PL type thread antenna

When choosing a CB antenna, the following aspects must be considered:

  • the method of attaching the antenna (fixed support or magnetic base)
  • antenna length and antenna positioning on your car or truck.

The CB antenna is very important in the station - antenna assembly because the quality of the transmitted and received signal depends on it.

The PNI ML75 CB antenna is one of the few PL antennas that can be tilted 90 degrees to enter passages, garages or low-height parking lots.

CB antenna PNI ML70

CB antenna PNI ML70

Compatible NIBP accessories

The PNI ML75 CB antenna with ø16mm thread is compatible with all PL type magnetic bases. For example: PNI 145/PL and with fixed mounting supports:

  • PNI T941 cable holder or PNI SPA100 holder for mounting on the trunk
  • PNI SPA110, PNI SPA120 support for mounting the antenna on the mirror or metal bar
  • PNI L1, L2, L20 or L21 support for mounting with pop rivets or screws directly on the bodywork

Write Your Own Review
You're reviewing:PNI ML75 CB antenna, 75 cm, 300W, foldable and PNI SWR-300 reflectometer for SWR measurement, black
Your Rating

PNI-ML75FC - CB antenna PNI ML75, length 75cm, 26-28MHz, 300W, foldable, without accessories

Product Identification
Product Code PNI-ML75FC
Working band CB
Product color (herringbone) Silver
Reel color Black
General characteristics
Operating frequency 26 - 28 Mhz
Maximum applied power 40 W continuous / 300 W for short time
Minimum S.W.R. in the center of the band less than 1.2:1
Length 750 mm
Impedance 50 Ohm
Material Stainless steel
Connector type PL
Hole diameter 16 mm
Weight 343 gr
Dimensions 750 X 40 X 40 mm
Polarization Vertical
Working distance 7 km
Operating temperature -26°C ~ +80°C
Tiltable Yes, up to 90 degrees
Package contains
Radio antenna Yes
Rubber mount Yes


PNI-SWR300 - Reflectometer PNI SWR-300 PWR-SWR Meter, for measuring the SWR of radio antennas in 26-30Mhz frequency and CB radio station power

Product identification
Product Code PNI-SWR300
General Features
SWR measurement Yes
Power measurement 0.5-10 W / 10-100 W
Accuracy SWR ± 5% / POWER ± 10%
Frequency 1.5-150MHz
Dimensions 85 X 76 X 58 mm
Impedance 50 Ohms
Connector SO 239
Package contains
Reflectometer Yes
User manual Yes



PNI-SWR300
Lang Type Name Link
EU10 Declaration of Conformity Declaration of Conformity EU10 Link
EU10 User manual User mannual EU10 Link