CB antenna performanceThe performance of the product is closely related to the technical characteristics of the antenna in ideal conditions of installation and use: SWR <= 1.2:1, maximum applied power 200 W, impedance 50 Ohms, glass fiber, etc. | |
Communication distanceThe communication distance is another decisive factor in the purchase and use of a CB antenna. Thus, the communication distance of 10 km is achieved under ideal working conditions: calibrated antenna, open field without obstacles, the station with the legally permitted maximum power of 4W and with a standard reception. Any obstacle such as: hills, mountains, buildings, walls can reduce this distance. | |
Antenna lengthThe length of the antenna is another very important factor that can influence the communication distance in traffic. Thus, the longer the antenna, the greater the range of action. The PNI S60 antenna is 59 cm long. | |
RG58 cable The length of the cable is 4 m, thus allowing you to mount the antenna wherever it is convenient for you on the vehicle and still be able to make the connection with the CB radio station. | |
Adjustable angleThis antenna can be tilted with the help of the butterfly screw with which it is provided, to enter passages, garages or low-height parking lots. Apart from these situations, an inclination greater than 30 degrees is not recommended because it can affect the performance of the antenna. |
PNI S60 CB antenna, 59 cm, with butterfly, 4m RG58 cable and PNI SWR-300 reflectometer for SWR measurement, black
PNI S60 CB antenna, 59 cm, with butterfly, 4m RG58 cable and PNI SWR-300 reflectometer for SWR measurement, black
£25.33
Availability:
In stock
SKU
PNI-S60-R300
PNI-S60CAB - PNI S60 CB antenna with butterfly, spike length 59 cm, with mount, 4 m cable and PL plug, fiberglass
Write Your Own Review
PNI-S60CAB - PNI S60 CB antenna with butterfly, spike length 59 cm, with mount, 4 m cable and PL plug, fiberglass | |
---|---|
Product identification | |
Product code | PNI-S60CAB |
Work tape | ? B |
Product color (spike) | Black |
General characteristics | |
Working frequency | 26 - 28 Mhz |
Maximum power applied | 200W |
Minimum SWR in the center of the band | less than 1.2:1 |
Length | 590 mm |
Impedance | 50 Ohms |
Material | Fiber glass |
Connector type | PL |
Cable length | 4 m |
size | 650 X 40 X 40 mm |
Polarization | vertically |
The package contains | |
Radio station antenna | Yes |
RG58 cable | Yes |
Plug PL259 | Yes |
Antenna coupling plug | |
Butterfly screw | Yes |
Fixed mount | Yes |
Support for holding the antenna | Not |
PNI-SWR300 - Reflectometer PNI SWR-300 PWR-SWR Meter, for measuring the SWR of radio antennas in the 26-30Mhz frequency and CB radio station power | |
---|---|
Product identification | |
Product code | PNI-SWR300 |
General characteristics | |
SWR measurement | Yes |
Power measurement | 0.5-10 W / 10-100 W |
Accuracy | SWR ± 5% / POWER ± 10% |
Frequency | 1.5-150MHz |
size | 85 X 76 X 58 mm |
Impedance | 50 Ohms |
Connector | SO 239 |
The package contains | |
Reflectometer | Yes |
User manual | Yes |
We found other products you might like!