PNI S9 CB antenna, 120 cm, with butterfly, 4m RG58 cable and PNI SWR-300 reflectometer for SWR measurement
PNI-S9CAB - PNI S9 CB antenna with butterfly spike length 120 cm with 4m RG58 cable
| Butterfly CB antennaThe PNI S9 CB antenna operates in the 26-30 MHz frequency range. With a length of 120 cm and a communication distance of up to 12 km (under ideal conditions of use), the PNI S9 CB antenna is perfect for drivers of TIRs, trucks or cars who want a product that provides them with a good communication in traffic. The SWR of less than 1.2:1 and the maximum supported power of 600W are essential specifications that recommend this product to the most demanding users. |
DV type CB antenna with butterflyWhen choosing a CB antenna, the following aspects must be taken into account: the method of attaching the antenna (fixed support or magnetic base), the length of the antenna and the positioning of the antenna on your car or truck. The CB antenna is very important in the station-antenna assembly because the quality of the emitted and received signal depends on it. The quality of CB PNI antennas is already known by the very low values of the SWR. |
|
| Compatible PNI accessoriesPNI offers a wide range of accessories recommended for butterfly antennas with cable included: PNI SPA100 bracket for mounting the antenna on the trunk, PNI SPA110 bracket for mounting the antenna on a mirror or metal bar, PNI SPA120 bracket for mirror mounting, PNI SPA130 bracket for mounting on teardrop, PNI L1 and L2 support. |
Tiltable CB antennaThe butterfly screw allows the antenna to be tilted to allow access to low locations such as parking lots or garages. We do not recommend tilting the antenna more than 30 degrees. A tilt angle that is too high could affect the antenna's performance |
|
PNI-S9CAB - PNI S9 CB antenna with butterfly spike length 120 cm with 4m RG58 cable | |
|---|---|
| Product identification | |
| Product code | PNI-S9CAB |
| Work tape | ? B |
| Product color (spike) | Silver |
| Coil color | Black |
| General characteristics | |
| Working frequency | 26 - 30 MHz |
| Number of channels | 90 |
| Maximum power applied | 600W |
| Minimum SWR in the center of the band | less than 1.2:1 |
| Length | 1265 mm |
| Impedance | 50 Ohms |
| Material | Stainless steel |
| Connector type | your |
| Hole diameter | 12.5 mm |
| Cable length | 4 m |
| Weight | 438 gr |
| size | 45 X 45 X 1350 mm (mount included) |
| Polarization | vertically |
| Working distance | 12 km |
| Operating temperature | -26°C ~ +80°C |
| tiltable | Yes, up to 90 degrees |
| The package contains | |
| Radio station antenna | Yes |
| RG58 cable | 4 m |
| Plug PL259 | Yes |
| Butterfly screw | Yes |
| Fixed mounting mount | Yes |
PNI-SWR300 - Reflectometer PNI SWR-300 PWR-SWR Meter, for measuring the SWR of radio antennas in the 26-30Mhz frequency and CB radio station power | |
|---|---|
| Product identification | |
| Product code | PNI-SWR300 |
| General characteristics | |
| SWR measurement | Yes |
| Power measurement | 0.5-10 W / 10-100 W |
| Accuracy | SWR ± 5% / POWER ± 10% |
| Frequency | 1.5-150MHz |
| size | 85 X 76 X 58 mm |
| Impedance | 50 Ohms |
| Connector | SO 239 |
| The package contains | |
| Reflectometer | Yes |
| User manual | Yes |
FAST SHIPPING
You'll have your ordered products in just a few days.
MONEY BACK GUARANTEE
If you decide to return your products, you will get all your money back.
ONLINE SUPPORT 24/7
Contact us and we will answer to all your questions about orders, returns or warranty.
