PNI Safe House Dual Gas 250LR gas sensor and solenoid valve kit with 2 carbon monoxide (CO) and natural gas sensors and 3/4 inch solenoid valve

2 in 1 protection

Equipped with 2 semiconductor sensors with long life, versatility and high tolerance to extreme ambient conditions and corrosive environments, which work independently of each other, the PNI Safe House Dual Gas 250LR notifies you instantly when it detects dangerous concentrations of CO (carbon monoxide) or natural gas. PNI Safe House Dual Gas 250LR offers the best protection against deadly gases. All in one unit.

The gas detector in the PNI Safe House Dual Gas 250LR package accurately detects carbon monoxide (CO), natural gases such as: methane, propane, butane, ethane, LPG and gaseous hydrocarbons such as: propylene and butylene.

The PNI Safe House Smart Gas 300 kit consists of a gas detector and a 3/4 inch solenoid valve.

Sound and light alarm

When the gas concentration reaches the preset level, the device emits a visual and audible alarm. The red LED will flash frequently accompanied by a continuous beep. If the detector is connected to the solenoid valve, it will send an electrical pulse to it. The solenoid valve will shut off the gas flow.

The alarm sound of at least 85dB reduces the risk of explosion and protects the life and safety of your property and family.

To stop the audible alarm, unplug the detector or wait until the concentration of the gas that triggered the alarm has decreased. After removing the cause that triggered the alarm, you can reopen the gas flow by lifting the red button on the solenoid valve.

Never ignore an alarm!

Easy installation

We recommend that the installation of the solenoid valve be performed only by qualified and authorized personnel. The solenoid valve must be installed in the direction of gas flow, marked on the solenoid valve.

Determine the installation location of the gas detector at a distance of no more than 1.5 meters from the gas source (stove, for example) and closer to the ceiling or floor depending on the density of the detected gases.

Fix the gas detector on the wall with the help of the included support. Power the detector to a 230V power source and to the solenoid valve via the plug and play socket.

After the 2 minutes of sensor priming, your alarm device is ready to ensure the peace and safety of your home and family.