Security cable with PNI Smart Lock for PNI 400C, 350C, 280C, 480C hunting cameras

Increased safety for hunting cameras and more

The PNI SmartLock security cable brings a high degree of security to protect hunting cameras located in the forest, on trees or in any other location.

Being a security system, it can also secure other goods such as bicycles, scooters, scooters, etc.

Simple locking system with padlock

The closing system is simple and allows locking the 2 meter long steel pipe in the special carabiner.

The lock provided is removable and allows changing the unlocking code extremely easily.

Of course, the lock can be replaced according to needs with other similar locking solutions.

Lock configuration

From the factory, the lock comes with the unlocking code 0-0-0. Align the number 0 of the 3 wheels with the red line on the lock to unlock the lock. To lock, bring the lock to the closed position and randomly rotate the 3 wheels.

Change lock code lock

1. Unlocking the lock: Adjust the 3 numerical dials so that the number zero (0) is collinear 0-0-0 with the red line on the lock.

2. Pull the lock tab vertically to open it and rotate the tab 180 degrees counterclockwise.

3. Press the lock tab into its body.

4. With the lock tab pressed, modify the 3 dials to obtain another password, desired by you. Write down the password in a notebook or special place for passwords to remember it in case you forget it.

5. Release the lock tab and turn it again 180 degrees to the original closing position. Turn the 3 rollers to lock the lock. The procedure is successful and in this way you have changed the password. Check the password and unlock the lock with the new password.

If you want to change your password again, repeat the steps above.