SilverCloud 1500VA 900W 6.8A voltage stabilizer
Maximum power |
|
|
The SilverCloud K1500VA automatic voltage stabilizer can be used to power electronic devices that consume up to 900 W cumulatively. |
Entry |
|
SilverCloud K1500VA is powered by a voltage that can vary between 140 and 260 V. |
|
Output |
|
|
The output of the stabilizer is 1500VA constantly offered through 2 Schuko sockets located on its rear panel. |
Exit delay |
|
The stabilizer is equipped with an output signal delay circuit that is recommended in the use of refrigeration equipment, in order to minimize the possibility of compressor motor failure. |
|
Dual meter |
|
SilverCloud K1500VA has a dual meter on the front panel to track both input and output voltage, and 3 indicator LEDs to track the status of the device. |
|
Protection |
|
The stabilizer is equipped with electrical circuits to protect against overvoltage (when the input exceeds 255 V), short circuit and overload. |
|
Video presentation |
|
Voltage stabilizer SilverCloud 1500VA 900W UK |
Features | |
Capacity | 900W/1500VA |
Current | 6.8A |
Output connectors | 2 x Schuko socket |
Output voltage | 230V ± 10% |
Input frequency | 50/60 Hz |
Nominal Input Voltage | 140V~260V AC |
Short circuit protection | Yes |
Overload protection | Yes |
Efficiency | 98% |
Storage temperature | -15~45 Grade C |
Working temperature | 0~40 Degree C |
Humidity | 10%RH ~ 95%RH |
Dimensions | 175 x 139 x 237 mm |
Weight | 5.2 kg |
Exit delay | 6~120 seconds |