Voltage stabilizer with relay PNI AVR M1000VA, 2.7A, 600W, 1000VA

No voltage fluctuations

The PNI AVR M1000VA 600W voltage stabilizer with relay has been designed to keep the output voltage as stable as possible. When the voltage from the electrical network fluctuates, the PNI AVR M1000VA will automatically adjust the output voltage to the normal value.

Depending on their capacity, PNI stabilizers have a wide range of applications: electronic devices, household appliances, air conditioners, power tools, refrigerators and in general, electronics that need stable voltage.

How does it work?

When the unit that measures the input voltage detects a variation outside the preset range, it will send a signal to the control unit. This will switch on/off the relays connected to the secondary voltage transformer to compensate for the variations and for the most precise control of the output voltage within the preset range.

Copper coil is the basic component of the voltage stabilizer. Voltage stabilizer with relay PNI AVR M1000VA 600W uses high quality pure copper. Thus, the coil has a longer life and greater efficiency.

Maximum load supported

The maximum load supported by the PNI AVR M1000VA voltage stabilizer is 600W 2.6A.

The stabilizer's 600W 2.6A capacity allows you to connect household appliances, including TVs, printers, fans and more.

Attention: do not connect consumers with loads exceeding the stabilizer's power. For example, electronics with a motor/compressor can have 2-6 times more power than the declared power at startup. Choose the stabilizer taking this into account.

Essential functions

Within the nominal voltage range ±25% 50/60Hz, the PNI stabilizer provides 100% output power. Outside this range, the output power should be according to the attached diagram.

Important functions:

• output delay (time-delay) - 6 or 180 seconds;
• automatic overvoltage and undervoltage protection (180V - 250V);
• overload/overtemperature protection;
• automatic adaptation to input frequency (50 / 60 Hz).